1. Ensure the positive and negative connection is right before powering.
2. No plugging and removing drivers when powering, otherwise it will easily burn the drivers.
3. No adjusting the driver current when the motors are running.
1. Integrate 2560 and Ramps1.4 to one PCB, easier wiring and more stable.
2. Use high-quality 4-layer PCB.
3. Use Marlin firmware same configuration way as Ramps1.4, it can replace Ramps1.4 directly.
4. Use a special power chip that supports 12V-24V.
5. Support a variety of stepper drivers: 4988, 8825, TMC2208, and TMC2100. (need to buy separately)
6. Available to work with LCD2004, LCD12864, MKS, TFT24/28/32/35/70.
7. Accept 24V input, and reduce the heated bed current to 1/4 which solves the Mosfet heat problem efficiently.
8. Available to connect external large stepper drivers.
9. Retain Servos, AUX-1 and AUX-2 interface of Ramps1.4, provide three 5V output and three 12V output interfaces.
| General | Brand: Makerbase Type: Control Board Model: Gen-L V2.1 |
| Specification | Support Stepper Drivers: 4988, 8825, TMC2208, and TMC2100. Power Chip Voltage: 12V-24V Available to Work with: LCD2004, LCD12864, MKS, TFT24/28/32/35/70 |
| Weight & Size | Package Weight: 0.11kg Package Size(L x W x H): 12x9x1cm |
| Package Contents | 1 x MKS Gen-L V2.1 Control Board |
